Jerry

I ran the unit through a diagnostic and inspected all functions. I could not duplicate a leak however I did find that the unit has over suds at some point. The customer does have oxy clean. I informed customer what might have occurred is over sudsing during oxy use. This is a common problem on this unit. Also I do see signs of sounder warpage I showed the customer if sounder breaks its better to replace the unit.

The pump and motor assy are worn out. It pumps but very weak. I would need to Rebiuld the pump and motor assy to correct the issue. I am send an estimate now. Office please follow up with the customer and see if they want to proceed with the repair.

Evap coil had frost pattern at -10 degrees but no evaporator fan unit has no air flow. I would need to replace the motor 1st and see if there are any other issues. Customer is aware and wants repairPlease give customer the 10% discount on laborOffice I ordered all the parts from reliable and rescheduled customer already ; ordrng 1 Wp2169142 (Blade) and 1 WP4389147 (Fan motor) and 2 WP2176759 (Motor gromet)s and 1 Ship (Ship)

I inspected the fridge and found that door reed switch to the main computer is shorted out this will need board and reed switch assy to correct the issue. Im researching parts to send estimate now. Office please reach out to the customer and follow up with them and see if they want to proceed with repair and collect parts deposit.; ordrng 1 11010104 (Computer board) and 1 11040031 (Reed switch assy) and 1 Shipping (Shipping)

I pulled unit re assembled it and then put it on 350 bake. Unit preheated and reached it factory temp job completed